NPort 6000 Series Software Installation/Configuration
6. To save the configuration to a text file, select Export from the COM Mapping menu. You will then be able
to import this configuration file to another host and use the same COM Mapping settings in the other host.
Command Line Installation/Removal
For NPort Windows Driver Manager v1.19 and above, it comes with command line script tool – npcli.exe for
installation, removal of the driver and capability of configuring NPort driver functions.
After successfully installing NPort Windows Driver Manager v1.19 (or above), the default file path is
C:\Program Files\NPortDrvManager as shown below. The main files that support the NPort command line
tool are npcli.exe and GIdMap.dat. You may move these two files to your preferred location.
To Next Page
Loading...
Need help?
General
