PRODUCT TECHNICAL MANUAL
FONOMAC 3
V2.20 – 06/2012
10
MTELFONOMAC3220_EN
1.6. Fixing equipment to the pushbutton panel
There are two possible systems to fix the equipment to the button panel:
Compac type Fixing: The equipment must be completely assembled from the rear of the button panel and
is fixed to it using welded bolts and nuts.
Roller type Fixing: The equipment’s information plate must be assembled from the front of the button panel
onto a cover frame; the rest of the equipment must be assembled from the rear and fixed to the bolts on
the information plate.
FIGURE 3. Compac type telephone fixing
(with welded bolts)
FIGURE 4. Roller type telephone
fixing (without welded bolts)
To Next Page
Loading...