© 2018 mPTech. All rights reserved. Hammer Energy
13
charge the battery. If the battery is completely discharged the device can not
be switched on even when the loading process is ongoing. Before the device
can be turned on again, the battery has to be charged for at least a few minutes.
In case of any problems with the battery or if in need of a replacement, the
device should be delivered to the manufacturer's service center. To charge the
battery one should:
1. Plug the microUSB plug to the socket in the device.
Incorrect charger connection (USB cable) can cause damage to the AC
adapter or the device. The damages resulting from improper handling are not
covered by the warranty.
2. Plug the charger into the wall socket. Once you start charging, an icon of
the battery situated in the upper right corner will change to an animated
symbol of lightning. If the device is turned off an animation depicting the
level of battery charge should appear.
The device can heat up during charging. It is a regular occurrence and should
not affect the stability or performance of the device.
3. When the charge reaches 100% it means that the battery is fully charged.
Finish the charging.
4. Unplug the charger from the wall socket and from the smart phone.
If the phone does not charge properly deliver it (with the charger) to a
service center of the manufacturer.
8. Buttons
Menu
• Pressing it will cause the list of open apps to appear, where you can switch
in-between or turn them off.
• Double quick press switches to previously used application.
Home
• One quick press takes you to device desktop.
• Longer press and release will turn on the Google search engine and access
Google Now™ function.
Back
• Pressing <Back> will cause exit from the application/return to the previous
screen.
• Longer press and release will activate the menu with options for
wallpapers and widgets.
Blockade on/off button
• One quick press locks/unlocks the screen.
• Pressing the button for about 2 sec. will cause:
To Next Page
Loading...
Need help?
General
