© 2018 mPTech. All rights reserved. Hammer Energy
14
o If the smartphone is off - the device would switch on.
o if the smartphone is switched on, call up a menu that allows you to turn
off the device, restart the system, quickly change the sound profile or
other functions assigned to it.
• You can also cause the reboot by pressing and holding the button until
the device turns off.
Volume increase and decrease buttons
• Pressing during a voice call will cause an increase or decrease of the audio
connection volume.
• Pressing the button while an incoming call mutes the ring tone.
• Pressing the button when no calls are active will decrease or increase the
volume of the ringtone, change sound profile on "vibration only" or "alarms
only".
• Pressing the button while camera app is open might start the shutter and
take a picture. (Works only if the software provides the function).
• Pressing the button in any other app will control volume level of music,
spoken instructions, or other sounds.
Turning on/off, reboot.
To switch the device on, press and hold (for about 3 seconds) on/off button.
To switch the device off press and hold (for about 2 seconds) on/off button and
choose [Power off].
To restart the device, press and hold (for about 2 seconds) on/off button and
choose [Reboot].
9. Using the touch screen
The touchscreen can be controlled by the following actions:
9.1. Touch
Touch one to start options, app, menu.
9.2 Swipe
Quickly swipe up, down, to the left or to the
right, to scroll the list or the screen.
To Next Page
Loading...
Need help?
General
