MRC SL-4035SD - Page 15

the measuring data along the time information will be
saved into the memory circuit.
The Display will show also show text " LOGGER "
when the data save into the memory circuit.
Remark :
How to set the sampling time, refer to Chapter 7-2,
page 19.
b. Pause the datalogger
During execute the Datalogger function , if press the
" Logger Button " ( 3-8, Fig. 1 ) once will pause the
Datalogger function ( stop to save the measuring data
into the memory circuit temporally ). In the same time
the text of " REC " will stop flashing.
Remark :
If press the " Logger Button " ( 3-8, Fig. 1 ) once agai
n
will execute the Datalogger again, the text of " REC " wil
l
flashing .
c. Finish the Datalogger
During pause the Datalogger, press the " REC Button "
( 3-4, Fig. 1) continuously at least two seconds, the " REC "
indicator will be disappeared and finish the Datalogger.
Remark :
When the battery is under the low battery conditio
n
( show the low battery indicator ), the Datalogge
r
function is disable.
13