MSA ALTAIR 2X - 3.9 Displaying Device Data

ALTAIR 2X
34
Use
GB
3.9 Displaying Device Data
The Information page can be accessed by pushing the button for over
one second.
The following modes are displayed:
Bump test
Peak Reading
The Peak/Hi and Min/Low values can be
cleared.
When this page is displayed, press the button
to clear.
- CLR is displayed
- Value is deleted
Short Term Exposure Limit The STEL reading calculated since power-ON
displays. When this page is displayed, press
the button to clear.
- CLR is displayed
- Value is deleted
STL value is automatically reset to zero when
the device is turned ON.
Time Weighted Average The TWA reading calculated since power-ON
displays. When this page is displayed, press
the button to clear.
- CLR is displayed
- Value is deleted
TWA value is automatically reset to zero when
the device is turned ON.