MSA ALTAIR 2X - Table of Contents

ALTAIR 2X
4
Contents
GB
Contents
1 Safety Regulations ......................................................................................6
1.1 Correct Use .......................................................................................6
1.2 Liability Information ............................................................................7
1.3 Safety and Precautionary Measures .................................................7
1.4 Warranty ............................................................................................9
2 Description ................................................................................................11
2.1 Overview ..........................................................................................11
2.2 On-Screen Indicators .......................................................................14
2.3 Sensor End of Life Warning .............................................................15
2.4 Sensor End of Life Alarm .................................................................15
2.5 Backlight ..........................................................................................16
2.6 Fresh Air Setup (FAS) .....................................................................16
2.7 Bump Test for Sensors with XCell Pulse Technology .....................16
3 Use .............................................................................................................16
3.1 Environmental Factors .....................................................................16
3.2 Settings ............................................................................................16
3.3 First Use ..........................................................................................17
3.4 Turning ON the Device ....................................................................17
3.5 Function Checks Before Use ...........................................................25
3.6 Duration of Use ................................................................................29
3.7 Monitoring Gas Concentration .........................................................31
3.8 Changing Alarm Setpoints ...............................................................33
3.9 Displaying Device Data ...................................................................34
3.10 IR mode ...........................................................................................35
3.11 Turning OFF the Device ..................................................................36
3.12 Data Logging ...................................................................................36