ALTAIR 2X
36
Use
GB
3.11 Turning OFF the Device
(1) Press and hold button until OFF is displayed.
(2) Release button while OFF is being displayed to turn off the device.
3.12 Data Logging
Session Data Log
The device can record events (see section 5.3 for details).
Periodic Data Log
Peak gas readings are periodically logged, based on user settings
(see section 5.3 for details).
Connecting Device and a PC
(1) Switch on PC and align device to the IR interface of the PC.
(2) Press the button (for more than 1 second) on the device to enter IR mode.
(3) Start the MSA Link™ Software on the PC and start the connection.
The date and time display are based on the PC time. Make sure that
the date and time on the PC are correct.
Changing the device battery can result in lost time in the data log.
After changing batteries, verify the Time and Date with the PC.
To Next Page
Loading...
