Need help?Do you have a question about the MSA Elite Series and is the answer not in the manual?
General| Sensors | 4 |
|---|---|
| Lens Shade | 9-13 |
| Auto-Darkening | Yes |
| Shade | 9-13 |
| Power Source | Solar and Battery |
| Reaction Time | 1/25, 000 second |
| Standards | ANSI Z87.1, CSA |
| Product Type | Auto-Darkening Welding Helmet |
| Viewing Size | 3.86 x 1.73 in |
Explains warning symbols used in the manual for hazards.
Details hazards from arc rays, sparks, and noise during welding.
Provides California Proposition 65 warning for cancer and reproductive harm.
Table showing recommended lens shades for different welding processes and currents.
Lists relevant ANSI safety standards for welding eye, face, and head protection.
Identifies controls for Elite and VSi auto-darkening lens assemblies.
Describes the function of the auto on/off button and low battery indicator.
Explains how to select Weld, Cut, Grind, or X-Mode on Elite and VSi lenses.
Details how to adjust the shade setting for Elite and VSi auto-darkening lenses.
Explains how to adjust the delay time for the lens to return to clear state.
Guides on adjusting sensitivity for Elite auto-darkening lenses.
Guides on adjusting sensitivity for VSi auto-darkening lenses.
Step-by-step guide for adjusting the lens settings on the Elite assembly.
Instructions for attaching the welding helmet to a hard hat using a slotted adapter.
Details on adjusting angle and distance for the slotted adapter.
Instructions for installing the adapter on a non-slotted hard hat.
Steps to attach the welding helmet to a non-slotted hard hat.
Procedure for replacing lens covers on the Elite Quick-Release model.
Procedure for replacing covers and shield on fixed shade flip-up helmets.
Details solar charging for fixed shade helmets and initial charging methods.
Instructions for installing magnifying lenses into the helmet.
To Next Page