10177245 Rev. 2 / OM-243792 Page 7
3-1. Helmet Controls − Continued
Fixed Shade No. 10
Auto-Darkening Lens
The fixed shade models have no
buttons or controls. The lens turns
on (darkens) automatically when
welding begins and turns off when
welding stops.
To ensure proper function, charge
lens internal battery prior to first
use or after extended storage
(about 30 days). Charge battery by
either of these methods:
Expose lens to direct sunlight
for 10 seconds.
Expose lens to light bulb for 20
minutes.
After initial charging, the welding
arc will maintain the charge in the
battery.
Fixed Shade
2 x 4 No. 10
Flip-Up Helmet
Notes
To Next Page
Loading...