MSA Elite Series - Default Chapter; Table of Contents

TABLE OF CONTENTS
SECTION 1 − WELDING HELMET SAFETY PRECAUTIONS − READ BEFORE USING 1.......
1-1. Symbol Usage 1...............................................................
1-2. Arc Welding Hazards 1.........................................................
1-3. Proposition 65 Warnings 2......................................................
1-4. Lens Shade Selection Table 3...................................................
1-5. Principal Safety Standards 3....................................................
SECTION 2 − SPECIFICATIONS 4.......................................................
SECTION 3 − OPERATING INSTRUCTIONS 6............................................
3-1. Helmet Controls 6.............................................................
3-1. Helmet Controls − Continued 7....................................................
3-2. Auto On/Off Button And Low Battery Light 8........................................
3-3. Mode Control 9................................................................
3-4. Variable Shade Control 10.......................................................
3-5. Lens Delay Control 12...........................................................
3-6. Sensitivity Control − Elite Auto-Darkening Lens 13...................................
3-7. Sensitivity Control − VSi Auto-Darkening Lens 14....................................
3-8. Typical Lens Adjustment Procedure 15.............................................
SECTION 4 − HARD HAT HEAD ASSEMBLY 16...........................................
4-1. Attaching Welding Helmet To Hard Hat (Slotted Adapter) 16...........................
4-2. Adjusting Hard Hat Slotted Adapter 17.............................................
4-3. Installing Non-Slotted Hard Hat Adapter 18.........................................
4-4. Installing Welding Helmet Onto Non-Slotted Hard Hat 19..............................
SECTION 5 − REPLACING THE LENS COVERS 20........................................
5-1. Replacing Lens Covers On Elite Quick-Release 20...................................
5-2. Replacing Lens Covers And Grinding Shield On Fixed Shade Flip-Up Helmets 21.........
SECTION 6 − REPLACING THE BATTERY 22.............................................
6-1. Solar Cell On Fixed Shade Helmets 23.............................................
SECTION 7 − INSTALLING OPTIONAL MAGNIFYING LENS 23.............................
SECTION 8 − MAINTENANCE AND STORAGE 24.........................................
SECTION 9 − TROUBLESHOOTING 24...................................................
SECTION 10 − PARTS LIST 26..........................................................
SECTION 11 − LIMITED WARRANTY 29..................................................