MSA fieldserver ProtoNode FPC-N64 - Routing Settings

7.2 Routing Settings
The Routing settings make it possible to set up the IP routing rules for the FieldServer’s internet and network connections.
NOTE:The default connection is ETH1.
• Select the default connection in the first row as either ETH 1 or ETH 2.
• Click the Add Rule button to add a new row and set a new Destination Network, Netmask and Gateway IP Address as
needed.
• Set the Priority for each connection (1-255 with 1 as the highest priority and 255 as the lowest).
• Click the Save button to activate the new settings.
Hunter Fans ProtoNode FPC-N64 18