MSA fieldserver ProtoNode FPC-N64 - Page 5

10 Troubleshooting 36
10.1 Lost or Incorrect IP Address 36
10.2 Viewing Diagnostic Information 37
10.3 Checking Wiring and Settings 38
10.4 LED Functions 39
10.5 Taking a FieldServer Diagnostic Capture 40
10.6 Factory Reset Instructions 41
10.7 Internet Browser Software Support 41
11 Additional Information 42
11.1 Update Firmware 42
11.2 BACnet: Setting Network_Number for More Than One ProtoNode on the Subnet 42
11.3 Mounting 43
11.4 Certification 43
11.5 Physical Dimensions 44
11.6 Change Web Server Security Settings After Initial Setup 45
11.6.1 Change Security Mode 46
11.6.2 Edit the Certificate Loaded onto the FieldServer 47
11.7 Change User Management Settings 48
11.7.1 Create Users 49
11.7.2 Edit Users 50
11.7.3 Delete Users 51
11.7.4 Change FieldServer Password 52
11.8 FieldServer Manager Connection Warning Message 53
11.9 System Status Button 54
12 Vendor Information – Huntner Fans 55
12.1 Yaskawa Modbus RTU or Modbus TCP/IP Mappings to BACnet, Metasys N2 and Modbus RTU 55
12.2 Mitsubishi Modbus RTU or Modbus TCP/IP Mappings to BACnet, Metasys N2 and Modbus RTU 55
12.3 TRAK Modbus RTU or Modbus TCP/IP Mappings to BACnet, Metasys N2 and Modbus RTU 57
12.4 Specifications 58
12.5 Warnings 58
12.6 Compliance with EN IEC 62368-1 59
13 Limited 2 Year Warranty 60
5 Hunter Fans ProtoNode FPC-N64