MSA ULTIMA X5000 - Housing; Component Overview

functionsoftheinstrument.Theproductcertification,however,doesnotincludeorimplyapprovaloftheSafeSwap
feature,communicationsprotocolorfunctionsprovidedbythesoftwareofthisinstrumentorofthecommunications
apparatusandsoftwareconnectedtothisinstrument.
• Followthewarningsbelowwhenremovingorreplacingsensors.Reference2.10ComponentOverviewforcomponent
overview.
○ NeverremoveorreplaceasensorbodyassemblyoranUltimaXIRPluswhileunderpowerorwhenexplosive
hazardsarepresent.
○ ConfirmthattheareaisfreeofexplosivehazardsbeforeremovingorreplacinganXCellSensorunderpower.
○ ToremoveanXCellSensor,unscrewXCellSensorthreefullturns,wait10seconds,andthenremovetheXCell
Sensorcompletely.
Failuretofollowthiswarningcanresultinseriouspersonalinjuryordeath.
2.9 Housing
TheULTIMA

X5000comesin316StainlessSteelforthehighestcorrosionresistance.Both¾”NPTandM25conduit
entriesareavailable.ToattachasensortoanM25housing,anM25adapterisrequiredandwillbeincludedwiththe
shipment.AnintegralsurfacemountbracketcanbeusedtomountdirectlyintothewallsurfaceorusedwithaU-Boltfor
mountingtoa2”pipe.Customtagsareavailableandeasilyattachtoanintegralring.
2.10 ComponentOverview
Figure 3 Component Overview
* Only used with M25 bases
US Ultima X5000 Gas Monitor 10
2 Description