2-17
Hardware Setup
Front Panel Connectors: JFP2, JFP3
The mainboard provides two front panel connectors for electrical con-
nection to the front panel switches and LEDs. The JFP2 is compliant with
Intel
®
Front Panel I/O Connectivity Design Guide.
1
2
9
10
JFP2
HDD
LED
Reset
Switch
Power
LED
Power
Switch
7
8
Power
LED
Speaker
1
2
JFP3
PIN SIGNAL DESCRIPTION
1 HD_LED_P Hard disk LED pull-up
2 FP PWR/SLP MSG LED pull-up
3 HD_LED_N Hard disk active LED
4 FP PWR/SLP MSG LED pull-up
5 RST_SW_N Reset Switch low reference pull-down to GND
6 PWR_SW_P Power Switch high reference pull-up
7 RST_SW_P Reset Switch high reference pull-up
8 PWR_SW_N Power Switch low reference pull-down to GND
9 RSVD_DNU Reserved. Do not use.
JFP2 Pin Definition
PIN SIGNAL PIN SIGNAL
1 GND 2 SPK-
3 SLED 4 BUZ+
5 PLED 6 BUZ-
7 NC 8 SPK+
JFP3 Pin Definition
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...
