MSI E7505 Master-LS2 - SCSI LED Connector: J18; Front USB Connector: JUSB3

2-18
MS-9121 E-ATX Mainboard
SCSI LED Connector: J18
Connect the J18 to the LED connector on the add-on SCSI adaptor and
the HDD LED will blink when add-on SCSI device is active.
Front USB Connector: JUSB3
The mainboard provides one front Universal Serial Bus connector for
users to connect optional USB ports.
PIN SIGNAL
1 VCC5
2 SCSI LED
3 HDD LED
4 VCC5
Pin Definition
J18
14
Pin Description Pin Description
1 +5V 6 USBP3+
2 +5V 7 GND
3 USBP2- 8 GND
4 USBP3- 9 NC
5 USBP2+ 10 Key Removed
Pin Definition
JUSB3
1
2
9
10
This manual downloaded from http://www.manualowl.com