MSI MS7797 - Clear BIOS Password Jumper

1-22
Getting Started
CLR_PWD1: Clear BIOS Password Jumper
The jumper is used to clear the BIOS password. If you want to clear the BIOS password,
set the jumper to clear password.
Normal Clear Password
1 1
Important
Please refer to the below steps to clear the password:
Power o󰘯 the system.
Short pins 2-3.
Turn on the system to POST screen.
Shut down the system.
Short pins 1-2.
Boot up the system.
1.
2.
3.
4.
5.
6.