4. Tighten shut-off cock (2) to specified torque using a torque wrench.
Name Size Type Lubricant Value/Standard
Spindle A/F11 Tightening torque 12 Nm
5. Using the equipment and chemicals from the MTU test kit, examine coolant for:
• antifreeze concentration
• Amount of corrosion protection oil
• pH value
6. For engine coolant change intervals, refer to (→ MTU Fluids and Lubricants Specifications (A001061/..)).
124 | Coolant Circuit, General, High-Temperature Circuit | MS150049/04E 2017-04
TIM-ID: 0000000938 - 013
To Next Page
Loading...
