Cleaning severely contaminated
connectors on DDEC
1. Disconnect connectors on both sides of
DDEC. For this purpose, withdraw connec-
tors (1).
2. Unscrew connectors (3).
3. Remove covers (2).
4. Clean connector housings, connector socket
housings and all contacts with isopropyl alco-
hol.
5. When connectors, sockets and all contacts
are dry: Install connectors and check plug-in
connection on DDEC (→ Page 148).
MS150049/04E 2017-04 | Accessories for (Electronic) Engine Governor / Control System | 147
TIM-ID: 0000008476 - 001
To Next Page
Loading...
