8.23.2 DDEC ā Checking plug-in connections
Preconditions
ā Engine is stopped and starting disabled.
Checking plug-in connections on
DDEC
1. Check all plug-in connections on both sides
of DDEC for secure seating.
2. Slide connectors (1) on until they latch into
position.
3. Screw in connectors (3) securely.
4. Seal non-assigned connector bases with cov-
ering caps (2).
5. If plug-in connection is defective, contact
Service.
148 | Accessories for (Electronic) Engine Governor / Control System | MS150049/04E 2017-04
TIM-ID: 0000008478 - 001
To Next Page
Loading...
