MTU 16V4000C21 - Page 72

Flash-
ing
code
PID SID FMI Description Maintenance tasks
82 143 4 Exhaust duct temperature
15, sensor voltage too low
(version 32.0 or later).
Contact Service.
82 144 4 Exhaust duct temperature
16, sensor voltage too low
(version 32.0 or later).
Contact Service.
82 154 4 EGR- temperature, input volt-
age too high.
Contact Service.
82 155 4 EGR differential pressure in-
put voltage too low.
Contact Service.
82 412 9 EGR temperature, intelligent
sensor does not respond
(version 33.0 or later).
Contact Service.
82 412 12 EGR temperature, intelligent
sensor failure (version 33.0
or later).
Contact Service.
83 73 0 Pump pressure too high. Contact Service.
83 98 0 Oil level is too high. 1. Check engine oil level
(→ Page 108).
2. Contact Service.
83 101 0 Crankcase pressure too
high.
Contact Service.
83 153 0 Crankcase pressure too high
(version 27.0 or later).
Contact Service.
83 173 0 Exhaust temperature too
high.
Contact Service.
83 411 0 EGR OPD, high (version 33.0
or later).
Contact Service.
83 412 0 EGR temperature too high
(version 33.0 or later).
Contact Service.
83 129 0 Exhaust duct temperature 1,
sensor voltage too high (ver-
sion 32.0 or later).
Contact Service.
83 130 0 Exhaust duct temperature 2,
sensor voltage too high (ver-
sion 32.0 or later).
Contact Service.
83 131 0 Exhaust duct temperature 3,
sensor voltage too high (ver-
sion 32.0 or later).
Contact Service.
83 132 0 Exhaust duct temperature 4,
sensor voltage too high (ver-
sion 32.0 or later).
Contact Service.
83 133 0 Exhaust duct temperature 5,
sensor voltage too high (ver-
sion 32.0 or later).
Contact Service.
72 | Troubleshooting | MS150049/04E 2017-04
TIM-ID: 0000003162 - 002