Display text Meaning Measure
TD P-Lube Oil Different measurement values trans‐
mitted by the two sensors for lube-oil
pressure
1. Check LOP visually (→ Page 243).
2. Perform LOP test procedures
(→ Page 245).
3. Check ECU plug connection
(→ Page 238).
4. Check engine wiring (→ Page 234).
5. Contact Service.
• Have sensors checked and re‐
placed if required.
TD T-Coolant The two coolant temperature sensors
provide different values
1. Check LOP visually (→ Page 243).
2. Perform LOP test procedures
(→ Page 245).
3. Check ECU plug connection
(→ Page 238).
4. Check engine wiring (→ Page 234).
5. Contact Service.
• Have sensors checked and re‐
placed if required.
Cylinder cutout Measuring point "Cylinder cutout ac‐
tive"
Status report for "cylinder cutout/num‐
ber of cylinders halved" during idling
156 | Troubleshooting | MW15550/06E 2012-02
TIM-ID: 0000008898 - 002
To Next Page
Loading...
Need help?
General