7.15.2 Engine oil filter – Replacement
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Oil filter wrench
F30379104 1
Engine oil
Oil filter
(→ Spare Parts Catalog)
Plastic ring
(→ Spare Parts Catalog)
DANGER
Unguarded rotating and moving engine components.
Risk of serious injury – danger to life!
• Take special care when working on a running engine.
WARNING
Engine noise above 85 dB (A).
Risk of damage to hearing!
• Wear ear protectors.
WARNING
Hot oil.
Oil can contain combustion residues which are harmful to health.
Risk of injury and poisoning!
• Wear protective clothing, gloves, and goggles / safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
CAUTION
Damage to component.
Serious damage to plant!
• For filter replacement with the engine running, operate the engine at low engine load.
• The filter which is to be exchanged must be cut out for a brief period only.
Oil filter replacement with the
engine stopped
1. Stop engine (→ Page 143) and disable en‐
gine start.
2. Cut out the filter to be replaced.
A Right filter cut out
B Both filters cut in (normal operating
position)
C Left filter cut out
MW15550/06E 2012-02 | Task Description | 211
TIM-ID: 0000006365 - 005
To Next Page
Loading...
