Number of cylinders 8
Stroke mm 150
Displacement of a cylinder Liters 1.99
Displacement, total Liters 15.92
Number of inlet valves per cylinder 2
Number of exhaust valves per cylinder 2
Raw water circuit (open circuit)
Number of cylinders 8
Raw water pump: Inlet pressure, min. L bar -0.2
Raw water pump: inlet pressure, max. L bar +0.5
Pressure loss in engine-external raw water system, max. L bar 1.0
Lube oil system
Number of cylinders 8
Lube oil operating temperature before engine, from R °C 70
Lube-oil operating temperature before engine, to R °C 75
Lube oil operating pressure upstream of engine, from R bar 4.8
Lube oil operating pressure upstream of engine, to R bar 5.3
Lube oil operating pressure (low idle) (meas. point: before engine) R bar 2.0
Fuel system
Number of cylinders 8
Fuel pressure at engine inlet connection, min. (when engine is starting) L bar -0.3
Fuel pressure at supply connection to engine, min. (when engine is run‐
ning),
L bar -0.3
Fuel pressure at supply connection to engine (when engine is starting),
max.
L bar +0.5
Fuel supply flow, max. R Liters/min 1.2
General operating data
Number of cylinders 8
Firing speed, from R rpm 100
Firing speed, to R rpm 120
Starter (electric)
Number of cylinders 8
Rated starter voltage (standard design) R V= 24
Starting equipment (air starter)
Number of cylinders 8
Starting-air pressure before starter motor, min. R bar 18
Starting-air pressure before starter motor, max. R bar 30
40 | Technical Data | MW15550/06E 2012-02
TIM-ID: 0000002877 - 002
To Next Page
Loading...
Need help?
General