Number of cylinders 8
Number of inlet valves per cylinder 2
Number of exhaust valves per cylinder 2
Raw water circuit (open circuit)
Number of cylinders 8
Raw water pump: Inlet pressure, min. L bar -0.2
Raw water pump: inlet pressure, max. L bar 0.5
Pressure loss in off-engine raw water system, max. permissible. L bar 1.0
Lube oil system
Number of cylinders 8
Lube oil operating temperature before engine, from R °C 70
Lube oil operating temperature before engine, to R °C 75
Lube oil operating pressure before engine, from R bar 4.8
Lube oil operating pressure before engine, to R bar 5.3
Lube oil operating pressure (low idle) (meas. point: before engine) R bar 2.0
Fuel system
Number of cylinders 8
Fuel pressure at engine inlet connection, min. (when engine is starting) L bar -0.3
Fuel pressure at engine inlet connection, min. (when engine is running) L bar -0.3
Fuel pressure at engine inlet connection, max. (when engine is starting) L bar 0.5
Fuel supply flow, max. A Liters/min 1.45
General operating data
Number of cylinders 8
Firing speed, from R rpm 100
Firing speed, to R rpm 120
Starter (electric)
Number of cylinders 8
Starter rated voltage (standard design) R V= 24
Starting equipment (with compressed air/hydraulic starter motor)
Number of cylinders 8
Starting-air pressure before starter motor, min. R bar 18*
Starting-air pressure before starter motor, max. R bar 30
52 | Technical Data | MW15550/06E 2012-02
TIM-ID: 0000036350 - 001
To Next Page
Loading...
Need help?
General