Number of cylinders 8
Number of inlet valves per cylinder 2
Number of exhaust valves per cylinder 2
Lube oil system
Number of cylinders 8
Lube oil operating temperature before engine, from R °C 70
Lube oil operating temperature before engine, to R °C 75
Lube oil operating pressure before engine, from R bar 4.8
Lube oil operating pressure before engine, to R bar 5.3
Lube oil operating pressure (low idle) (meas. point: before engine) R bar 2.0
Fuel system
Number of cylinders 8
Fuel pressure at engine inlet connection, min. (when engine is starting) L bar -0.3
Fuel pressure at engine inlet connection, min. (when engine is running) L bar -0.3
Fuel pressure at engine inlet connection, max. (when engine is starting) L bar 0.5
Fuel supply flow, max. A Liters/min 10
General operating data
Number of cylinders 8
Firing speed, from R rpm 100
Firing speed, to R rpm 120
Starter (electric)
Number of cylinders 8
Starter rated voltage (standard design) R V= 24
Starting equipment (with compressed air/hydraulic starter motor)
Number of cylinders 8
Starting-air pressure before starter motor, min. R bar 18*
Starting-air pressure before starter motor, max. R bar 30
Capacities
Number of cylinders 8
Engine oil capacity, initial filling (standard oil system) (Option: max. operat‐
ing inclinations)
R Liters 65
Oil change quantity, max. (standard oil system) (option: max. operating in‐
clinations)
R Liters 60
Oil pan capacity at dipstick mark “min.” (standard oil system) (Option: max.
operating inclinations)
L Liters 45
Oil pan capacity at dipstick mark “max.” (standard oil system) (Option: max.
operating inclinations)
L Liters 55
MW15550/06E 2012-02 | Technical Data | 55
TIM-ID: 0000036349 - 001
To Next Page
Loading...
Need help?
General