MULTILIFT Ultima SL Flex - Page 49

49
Ultima S / SL Flex & Pro
3/2019
Hooklift Multilift Ultima S / SL Flex & Pro
User Manual
114060421
Possible safety codes in the
display when lowering down
SAFETY CODE DESCRIPTION NOTE
C007, C008
MIDDLE FRAME DOWN SENSOR (119) IS ACTIVE, BUT REAR
FRAME DOWN SENSOR (318) IS NOT ACTIVE.
CHECK THE SENSOR 119 AND THE CABLE.
TIPPING IS WORKABLE.
C009, d012
BODY LOCKS OPEN SENSOR (316) AND BODY LOCKS CLOSED
SENSOR (317) ARE BOTH ACTIVE.
CHECK WHY SENSOR 316 IS ACTIVE.
TIPPING IS WORKABLE.
d012
BODY LOCKS CLOSED SENSOR (317) IS NOT ACTIVE.
CHECK WHY THE SENSOR IS NOT ACTIVE.
TIPPING IS WORKABLE.
d003, d012
TIPPING LOCK CLOSED SENSOR (319) HAS LOST SIGNAL.
CHECK THE SENSOR 119 AND THE CABLE.
TIPPING IS PREVENTED.
d015
HOOK ARM BACK SENSOR (320) IS ACTIVE.
CHECK THE SENSOR AND CABLE.
TIPPING IS PREVENTED.
d021
URB OUT SENSOR (323) IS ACTIVE.
CHECK THE SENSOR.
TIPPING IS PREVENTED.
d022
URB IN SENSOR (322) IS ACTIVE.
CHECK THE SENSOR.
TIPPING IS PREVENTED.
SAFETY CODE DESCRIPTION NOTE
C009, d012
BODY LOCKS OPEN SENSOR (316) AND BODY LOCKS CLOSED
SENSOR (317) ARE BOTH ACTIVE.
CHECK WHY SENSOR 316 IS ACTIVE.
LOWERING IS
WORKABLE.
d012
BODY LOCKS CLOSED SENSOR (317) IS NOT ACTIVE.
CHECK WHY THE SENSOR IS NOT ACTIVE.
LOWERING IS
WORKABLE.
d012
TIPPING LOCK CLOSED SENSOR (319) HAS LOST SIGNAL.
CHECK THE SENSOR AND CABLE.
LOWERING IS
WORKABLE.
d015
HOOK ARM BACK SENSOR (320) IS ACTIVE.
CHECK THE SENSOR AND CABLE.
LOWERING IS
WORKABLE.