TM1215 Iss. 6.0 RPR750
• Extended alert - software enabled option; flashing LED every 2s, programmable
tone & vibrate repeat period, 2s to 512s; alert continues until cancelled by user.
1.1.5 Display: -
14 character Liquid Crystal Display (LCD), with full alphanumeric scrolling
capability. User selectable read orientation; automatic white LED back-lighting;
software enabled "on demand" option.
1.1.6 Message options: -
• Free format - Maximum off-air message length per call of 120 characters;
maximum of 5 stored message calls, or total of 600 characters; each message
time stamped.
• Beep code alpha format - up to 4 pre-programmed alphanumeric messages, each
of up to 14 characters in length.
1.1.7 Speech (MK6 & MK7 variants only)
• "Live" and stored speech message options. Auto-switched to live speech with pre-
set timeouts (10s, 30s or 150s); termination off-air by encoder, or locally by
CANCEL button.
• Up to 120s of speech storage available, configurable in 5 partitions of 24s duration
per partition.
1.1.8 Optional Features
• Language - software enabled option; English, French, German, Dutch, plus 12
further options.
• Call Comparator - software enabled option; will ignore any call identified as a
"repeat" of the previous call, within chosen time period of 30s, 120s or 300s.
• Time display - software enabled option; on or off. May be set within the pager, or
received as an off-air signal from the controlling system.
• Out of range warning - software enabled option; alert to be given after a period of
3.5 minutes (MK6/MK7), or 5 minutes (POCSAG). Audible, tactile and visual alert
options.
• Low battery indication - software enabled option; audible, tactile and visual alert
options (not recommended for re-chargeable cells).
• Permanent On - software enabled option.
• Test mode - software enabled option; will override programmed alert options to
provide a short alert + call-count function for test purposes (coverage or pager).
1.1.9 Mechanical Construction
• Minimum IP54 rated ingress protection.
• Detachable Griptite clip.
• Optional detachable lanyard.
1.1.10 Charging/Absence/Programming
Contacts are provided to enable charging, absence registration and programming
facilities.
• Charging - options of charging rack, absence/charging rack, or single desk-top
charging unit. For Intrinsically safe variants, only protected charging units as
supplied by Multitone should be used.
• Absence - automatic absence registration when inserted into an absence rack.
Data link with control system provides message facility e.g. display User No. Pager
automatically enters switch-on sequence, when removed from the rack.
• Programming - software enabled options, may be programmed using a Multitone
programming "pocket", software and a PC.
5
To Next Page
Loading...