EasyManua.ls Logo

Multitone RPR750 Series - 1.2 Technical Specifications

Multitone RPR750 Series
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TM1215 Iss. 6.0 RPR750
1.2. Technical Specifications
1.2.1 Radio Parameters
Model: UHF - RPR753; VHF - RPR752; HF - RPR751
Frequency Range:
407 - 470MHz 137 - 174MHz 25 - 54MHz
Frequency Bands:
407 - 417MHz 137 - 144MHz 25 - 27.5MHz
430 - 435MHz 144 - 149MHz 27.5 - 30.5MHz
435 - 440MHz 149 - 155MHz 30.5 - 35MHz
440 - 444MHz 155 - 161MHz 35 - 39MHz
444 - 447MHz 161 - 167.5MHz 39 - 43.5MHz
447 - 451MHz 167.5 - 174MHz 43.5 - 48.5MHz
451 - 457MHz 48.5 - 54MHz
457 - 463MHz
463 - 470MHz
Channel Spacing:
10kHz, 12.5kHz, 20kHz & 25kHz
(10kHz available for HF variants only)
Intermediate Frequencies:
UHF: 45MHz & 455kHz; VHF: 21.4MHz & 455kHz; HF: 455kHz
Crystal Frequency:
UHF:
Carrier Frequency - 45MHz VHF: Carrier Frequency - 21.4MHz
3
HF: (Carrier Frequency - 455kHz)/2
Sensitivity:
The sensitivity figures specified are on-body typical, for operation at the ambient
temperature range 18ºC - 25ºC. At temperatures outside of this range, but within the
specified extremes, performance is at an intermediate value. At specified extremes, the
degradation of sensitivity shall not exceed +6dB, relative to the ambient figure.
The battery voltage should be above the low battery trigger point.
Variant Best Position 8 Position Average
RPR 751 15µV/m 25µV/m
RPR 752 15µV/m 22µV/m
RPR 753 15µV/m 25µV/m
Figures quoted are for operation @ 512 Baud data rate. An average degradation of 2dB in
the sensitivity performance should be allowed for, when using 1200 Baud.
6

Table of Contents

Related product manuals