1-32 Specifying Default Settings
Function Description Settings
e-mail Settings You can set the default settings for batch
transmissions, templates, and the file format for
the Scan to E-Mail function and internet faxes.
For details, refer to Chapter 7, “Specifying Default
Settings” in the Scanner and Fax Guide.
Fax Settings You can set the default values for the fax mode,
such as the resolution and contrast for the
documents to be faxed.
For details, refer to Chapter 7, “Specifying Default
Settings” in the Scanner and Fax Guide.
Printer
Settings
You can set the default values for the printer mode,
such as the printer controller settings and the auto
deletion time setting for security printing.
For details, refer to Chapter 9, “Setting the Print
Controller” and “Setting the Auto Deletion Time for
Security Printing” in the Printer Guide.
Sound Settings You can set the various sound settings.
l
Volume
You can adjust the volume of the confirmation tone,
completion tone, alarm, operation help, and beep.
These volumes cannot be set individually.
l
Confirmation Tone
You can change the tone that is heard when
pressing the buttons.
l
Completion Tone
The machine can inform you that a copy or internet
fax operation is completed with a beep.
To set all of the following completion tones, select
either [OFF], or [Type 1] to [Type 3].
To set the sounds individually, select [Custom], and
specify the settings individually.
Copy Complete: When copying is complete
Transmission Complete:
When fax or internet fax transmission is
completed
Reception Complete:
When fax or internet fax reception is completed
Rx Print Complete:
When printing of a received document is
complete
PC Printing Complete:
When the printing of a document from a
computer is complete
List Printing Complete:
When printing of a list is complete
Glass Scan Complete:
When the scanning of a document on the
document glass is complete
Low
Middle
High
OFF
Low
Mid
High
OFF
Type 1
Type 2
Type 3
Custom
To Next Page
Loading...
Need help?
General
