Configuring the network settings > 21
Windows 2000
1. Right-click My Computer on the desktop and then select Manage.
2. In the right window, double-click System Tools > Local Users and Groups, and
then Right-click Users and select New User.
3. Enter the user name (C-2) in User name and the password (C-3) in Password
and Confirm Password.
4. Select User can not change password and Password never expires, and then
click Create.
Click Close to close the New User dialog.
5. Double-click User and check that the user created in step 4 is displayed.
Close the Computer Management window.
6. Create a new folder on the computer with the shared folder name entered in C-5.
7. Right-click the folder created in step 6 and then select Sharing.
8. Select Share this folder and then click Permissions.
9. Click Add.
10. Select the user account created in step 4 and then click Add.
11. Check that the user account is displayed, and then click OK.
12. Select the Allow check box for Full Control, and then click OK.
13. Ensure that the icon of the shared folder changes into the icon with a hand, and then
close the window.
NOTE
If User must change password at next logon is selected, clear it so that
you can select User can not change password and Password never
expires.
NOTE
It is recommended that you create a folder in the local drive, not on the
desktop or “My Documents”.
NOTE
Create a profile to complete the setup for Scan To Network PC. Refer to
“Creating a profile for scan to network PC” on page 22.
To Next Page
Loading...
Need help?
General
