Murr Elektronik CUBE20S User Manual

CUBE20S expansion manual
Terminal and power module incl. base
3 / 70
Table of Contents
1 Introduction 5
1.1 Service and support 5
1.2 Introduction / about this document 5
1.3 Symbols 5
1.4 Trademarks 6
2 For your own safety 8
2.1 Target group 8
2.1.1 Training / qualification 8
2.2 Intended purpose 8
2.3 General safety instructions 9
2.4 Notes on electrostatically sensitive equipment 9
2.5 EMC installation guidelines 11
2.6 Notes on spare parts and accessories 11
2.7 Environmentally friendly disposal 12
2.8 EC Declaration of Conformity 12
2.9 Warranty and liability 12
3 System description 13
3.1 Hardware revision 17
4 General data 18
5 Mounting 20
5.1 Dimensions 20
5.2 General notes 21
5.2.1 Functional principle of the locking 22
5.3 Installing the DIN rail 23
5.4 Mounting of the bus node 24
5.5 Installing the expansion modules 25
5.6 Replacing an electronic module 26
5.7 Installing the bus cover 27
5.8 Installing the shield bus carrier 28
6 Disassembling and replacing modules 29
6.1 Procedure 29
6.2 Replacing the bus node 30
6.3 Replacing an expansion module 31
6.4 Replacing an electronic module 33
6.5 Replacing a module group 34
7 Installation 36
7.1 General notes 36
7.2 Spring terminals 36
7.2.1 Procedure 37

Murr Elektronik CUBE20S Specifications

General

Brand	Murr Elektronik
Model	CUBE20S
Category	I/O Systems
Language	English