VJ-2638/1638/1638W OPERATION MANUAL Before using
3.7 Connecting the printer to PC 123
3.7 Connecting the printer to PC
This section explains how to connect the printer and a PC.
3.7.1 System requirements
The operating systems with which this printer is compatible are as follows
NOTE
• The required memory varies depending on the application software or the print data type.
• A large hard disk and memory are recommended.
• For the system requirements for the operation of the software server RIP (option), refer to the
operation manual of the software server RIP.
3.7.2 Preparing cables
The printer is equipped with a network interface for connecting with a PC.
You need a network interface cable to connect a PC with this printer.
Prepare the cable depending on the PC that it will be connected to.
TIP
About connecting a network interface cable, refer to 3.7.3 Connecting a network interface cable.
For the recommended cable specifications, refer to
8.2 Interface specification.
Operating system Windows 7, Windows Vista, Windows XP
To Next Page