MUTOH Valuejet VJ-2638 - Revision History; General Information

VJ-2638/1638/1638W OPERATION MANUAL
305
Revision History
General Information
Changes
Date Version Manual code Supported Firmware
2011.10 00 VJ1638xE-A-00 V.1.00
2011.12 01 VJ1638xE-A-01 -
2012.11 02 VJ1638xE-A-02 -
2013.5 03 VJ1638xE-A-03 V.2.07
Version Reason Chapter Section Description Page Errata
00 - - - Publication of the first edition - -
01 - - - - - -
02 - - - - - -
03 Add Chapter 2 2.2.4 “Ink level indicator” Added overview of ink level
indicator function.
p.35 02a
03 Add Chapter 2 2.2.4.1 “Estimated ink
level graphic”
Added detailed description of
ink level indicator.
p.36 02a
03 Change Chapter 5 5.1.7 “Method of Cut
menu”
Added a note for cut direction. p.216 02a
03 Add Chapter 5 5.1.7.1 “Cut Pressure
menu”
Added a function to select the
cutting pressure.
p.216 02a
03 Change Chapter 5 5.1.26 “Header Dump
menu”
Changed the part of the
description to the note.
p.229 02a
03 Change Chapter 5 5.1.28 “Heater Control
menu”
Added the heater control
function to reduce heat
deformation of printing media.
p.230
p.231
02b
03 Change Chapter 5 5.7 “Display menu” Added a function to display/hide
the ink level indicator.
p.241 02a
03 Add Chapter 5 5.7.4 “Remain Ink menu” Added description for function
to display/hide the ink level
indicator.
p.242 02a
03 Change Chapter 6 6.1.3 “Replacing Flushing
box sponges”
(3) Replacing steps
“1. Check the followings while
the printer is turned ON.” .
p.258 -
03 Change Chapter 6 6.1.4 “Replacing Cutter” (3) Replacing steps
“1. Check the followings, while
the printer is turned ON.” .
Corrected the table of step 5.
Corrected the table of step 6.
p.263
p.266
p.267
-