ValueCut Kullanım Kılavuzu
Illustrator Plug-In A-5
Multiple Copies
It is suggested to select “Multiple Copies” when you would
like to make several copies of one image on your material to
increase cutting accuracy.
Multiple Copies
No. of X Copies: The numbers of copies on X axis
No. of Y Copies: The numbers of copies on Y axis
Range: 1~50. (The more copies you make, the more
time is needed for data transmission.)
Numbers of X Copies * Numbers of Y Copies = The
total amount of image copies
Copies with outline： To show outlines of image graphics
Margin: Space between marks; must be 0 or ≧ 20, no
negative numbers allowed
The system will create the as shown in the picture below.
X axis
Y axis
To Next Page
Loading...
