MUTOH VC-600 - The Left-Hand Side; The Right-Hand Side

ValueCut KullanımKılavuzu
General Information 1-5
1.4 4 The Left-hand Side (Şekil 1-4)
1.4.5 The Right-hand Side (Şekil 1-5)
Fuse
–
3 Amp.
AC Power Connector – used to insert the AC power cord.
Power Switch – On when switches to [I]; Off to [O]
Şekil 1-4
Serial Interface Connector (RS232C) – used
to connect the cutting plotter to a computer
through a serial interface cable.
Şekil 1-5
USB Connector – used to connect the cutting
plotter to a computer through a USB cable.