MUTOH VC-600 - Other operational problems

ValueCut Kullanım Kılavuzu
Trouble Shooting 7-3
7.2.2 Other operational problems
1. Pinch rollers
O (CORRECT) ╳ (INCORRECT)
Press
down
Stop bar
ENABLE
Pull up bottom to release grip
Press
DISABLE
Note: Never press the top release grip (the release grip is fully pressed when a clip
sound is heard) and pull the bottom release grip at the same time as the pictures shown
below. This will prevent you from disabling the pinch roller as the stop bar will not reach
the correct position and therefore will not be functioning.