ValueCut Kullanım Kılavuzu
Automatic Aligning System
5-8
TIPS1: Leave some space between the graphic and contour line.
TIPS2: Create the contour in a separate layer and assign a different color for it.
Add registration marks around the graphic.
Adım 2 Placing the Registration Marks
The AAS Layout Instruction:
* Auto-detection function on the 1
st
mark covers the grey area
Suggested 30mm margin on both left and right sides of media sheet.
Suggested 50-70 mm margin on top and bottom edge of the media sheet to
prevent sheets dropping or any error occurred while media sizing.
Note:
The Multiple Copies function is also available. It automatically copy the graphic and
registration marks.
To Next Page
Loading...
