ValueCut Kullanım Kılavuzu
CorelDRAW Plug-In A-4
Segmental Positioning
For precise cutting quality, it is suggested to select “Segmental
Positioning” when you are working on an extra long or large-sized
image to increase cutting accuracy.
Segmental Positioning
X Adım: The distance of intermediate position on the X axis
Y Adım: The distance of intermediate position on the Y axis
Range: 200mm~600mm
Optimized Setting: Less than 500mm
The system will create the marks as shown in the picture below.
Segmental Positioning
To Next Page
Loading...
