MV Agusta F3 - Table of Lubricants and Fluids

MAINTENANCE 6
6
EN
Description Recommended product Specifications
Engine lubrication oil eni i-Ride moto2 5W-40 (
*
) SAE 5W/40 - API SL
Ethylene glycol diluted
Coolant AGIP ECO - PERMANENT with 50 percent
distilled water
Brake and clutch fluid Agip Brake 4 DOT4
Drive chain lubrication oil D.I.D. CHAIN LUBE –
6.3. Table of lubricants and fluids
*
: MV Agusta suggests to refer directly to its authorized dealers in order to purchase the recommended
product. The eni i-Ride moto2 5W-40 engine oil has been expressly produced for the F3 motorcycle
engine. If the above described lubricant is not available, MV Agusta
suggests to use a fully synthetic engine oil having characteristics
equal or better than the ones prescribed in the following standards:
– Consistent with: API SL
– Consistent with: ACEA A3
– Consistent with: JASO MA, MA2
– SAE Rating: SAE 5W-40
NOTE
The above standard denominations must be written, alone or
together, on the engine oil container label.
Engine Oil
SAE 5W-40
API SL
ACEA A3
JASO MA, MA2
- 135 -