MV Agusta F3 - TC Mode

- 76 -
OPERATION 4
4
EN
4.4.4. “TC” Mode
Press “SET” in order to access to “TC” mode, then
press “OK” for less than three seconds until “TC
LEVEL” appears. The current traction control level is
the same as the one shown on the display.
NOTE
The traction control level may be changed or
set even during the use of the vehicle.
Press “OK” for less than three seconds: the traction
control level rises up to the next value. On the other
hand, by pressing “SET” for less than three seconds,
the traction control level decreases to the lower value.
Such value may range between 0 and 8.
Press “SET” for over three seconds to confirm the
selected traction control level.