- 77 -
OPERATION 4
4
EN
4.4.5. Chronometer
Lap time recording
Turn on the chronometer (“CHRONO” mode) to
record the time taken to cover a lap.
Press the headlight button to start recording the
time. The colon that separates the minutes from the
seconds and from the tenths of a second will start blink-
ing. Now, the instrument is recording the time.
NOTE: When the “CHRONO” mode is activa-
ted, the first pressing of the headlight button
automatically enables the “TC” function.
From this moment on, it is possible to imme-
diately change the traction control level by
properly operate the “SET” and “OK” buttons
(see §4.4.4.).
To Next Page
Loading...
