MAINTENANCE 6
6
EN
- 143 -
6.6.1. Topping up the coolant level
Unscrew and remove the coolant filler
cap. Using a syringe, top up with the
recommended coolant (see §6.3).
WARNING
The cooling system is under
pressure. Always very carefully
remove the coolant filler cap.
Never attempt to remove the
coolant filler cap until the motor-
cycle has completely cooled to
room temperature. Failure to
observe this warning will result
in coolant being splashed on
you with subsequent serious
burns and serious personal
injury. If you have the slightest
doubt that the motorcycle has
completely cooled, do not
remove the cap, but allow the
motorcycle to completely cool.
To Next Page
Loading...
