MAINTENANCE 6
6
EN
Lubrication
To ensure proper operation, the drive chain needs
to be properly lubricated.
Preliminary cleaning - Before lubrication, the
dirt accumulated on the chain must be dissolved
using kerosene and then removed with a clean
rag and/or an air jet.
CAUTION
Never clean the chain with hot steam,
high pressure water jet, gasoline or
other solvents. The drive chain contains
O-rings. To prevent damage to the O-
rings, the chain must be cleaned using
kerosene only.
WARNING
Kerosene is highly toxic and flammable.
Avoid contact and inhalation. Keep
kerosene away from sparks and flames.
Keep kerosene out of reach of children
and domestic animals. Correctly dispo-
se of exhaust kerosene, in order to
avoid environmental pollution.
- 155 -
To Next Page
Loading...
