TECHNICAL INFORMATION 8
8
EN
- 204 -
Specifications
Description F3 675
Gear ratio (overall ratios)
First gear 2.85 (14.493)
Second gear 2.13 (10.821)
Third gear 1.78 (9.053)
Fourth gear 1.58 (8.040)
Fifth gear 1.43 (7.274)
Sixth gear 1.32 (6.712)
FRAME
Type CrMo steel tubular trellis (MAG welded)
Swingarm pivot plates Aluminium alloy
FRONT SUSPENSION
Type “Upside down” telescopic hydraulic fork with external and separated
adjustment of rebound and compression damping and of spring preload
Rod diameter 43 mm (1.69 in)
Travel on leg axis 125 mm (4.92 in)
REAR SUSPENSION
Type Progressive, single shock absorber with extension,
compression and spring preload adjustment
Swingarm Aluminium alloy
Wheel travel 123 mm (4.84 in)
To Next Page
Loading...
