- 88 -
Maintenance
B
- Press “OK” for less than three seconds; the displayed
setting will start flashing.
- By repeatedly pressing “OK” for less than three
seconds, the following settings can be displayed in
sequence:
•
“NORMAL”
• “RAIN”
• “SPORT”
- Press “OK” for more than three seconds; the new set-
ting will be confirmed. The displayed caption stops
flashing and after a few seconds the display returns to
“GAS SENSITIVITY” mode. It is now possible to pro-
ceed with the setting of the following parameter.
- Maximum engine torque: Press “OK” for less than
three seconds until “MAX ENGINE TORQUE”
appears.
- Press “SET” for less than three seconds. The display
shows the current setting for maximum engine torque.
To Next Page
Loading...
