Maintenance
- 89 -
B
- Press “OK” for less than three seconds; the displayed
setting will start flashing.
- By repeatedly pressing “OK” for less than three
seconds, the following settings can be displayed in
sequence:
• “SPORT”
• “RAIN”
- Press “OK” for more than three seconds; the new set-
ting will be confirmed. The displayed caption stops
flashing and after a few seconds the display returns to
“MAX ENGINE TORQUE” mode.
- Engine brake: Press “OK” for less than three seconds
until “ENGINE BRAKE” appears.
- Press “SET” for less than three seconds. The display
shows the current setting for engine brake.
To Next Page
Loading...
