Maintenance
- 95 -
B
DEALER MENU
The instrumentation provides the opportunity to opera-
te on an additional set of parameters.
The auxiliary functions available are:
•
“SERVICE” (Scheduled maintenance expiration)
• “UNIT CHANGE” (Changes unit of measurement)
Viewing and editing modes of operation is performed in
accordance with the procedures outlined in the para-
graphs below.
“SERVICE” Mode
This operating mode displays the mileage range with
respect to expiration of the next scheduled maintenan-
ce.
When the mileage range upon maintenance
servicing is less than 1000 km, its relative
value automatically appears after the start-
up screen of the motorcycle.
NOTE
q Mileage range resetting
- Press the "SET" and "OK" buttons at the same time
for more than ten seconds to access the "DEALER
MENU".
WARNING
The modification or adjustment of display
functions must be carried out with the engi-
ne off and running on neutral, with the
motorcycle stopped with the stands on the
ground. Changing display settings while
running is prohibited.
To Next Page
Loading...
