- 72 -
Maintenance
B
- Press the “OK” key for less than three seconds until
the partial speedometer 2 function (“TRIP 2”) appears
on the display.
- By pressing the “OK” key for more than three
seconds, the “TRIP 2” value will be reset to zero.
“TC” Mode
- Press the "SET" button to switch on "TC" mode, then
press the "OK" button for less than three seconds
until the message "TC LEVEL" appears. The current
traction control level is the value displayed.
WARNING
The display modes may be changed or set
when the engine off, the gear in neutral, the
motorbike stationary with your feet on the
ground. Do not change the display while dri-
ving.
To Next Page
Loading...
