Maintenance
- 77 -
B
- Subsequently, by pressing the flashing high beam
headlight key followed by the “OK” key for more than
three seconds, all the previously acquired times can
be cancelled.
- Once all the data have been cancelled, press the
“SET” key to return to the “LAPS VIEW” mode and
then to the following mode.
- Cancellation of best time: Access the “LAPS VIEW”
mode and press the “SET” key for less than three
seconds until the words “BEST LAP RESET” appear
on the display.
- Press the “OK” key for less than three seconds; the
value of the fastest last lap time memorised will start
flashing.
To Next Page
Loading...
